32mm x 1 1/4" Plasson Compression Male Adaptor for use with MDPE and HDPE pipe. WRAS approved and has a working pressure of up to 16 bar. Impact and frost resistant. The fitting is made from WRAS certified polymers, meaning there will be no growth of harmful bacteria, which could leak into the water as it flows through. Plasson compression fittings are installed by simply inserting the pipe into the fitting up to the pipe stop, then push the ring up to the fitting and tighten the ring. This will create a strong seal as the fitting has a O-ring made which performs well at stopping leaks. PFTE tape is recommended when installing.
To remove the fitting, unscrew and remove the nut, and pry the ring from the pipe. Then remove the pipe. Place the O-ring back inside the fitting before re-inserting pipe.