Grey 50mm FloPlast solvent weld boss adaptor to use with a 110mm strap boss to allow a solvent weld pipe to be installed in the boss.
This solvent weld boss adaptor is secured using solvent weld cement for a permanent and strong installation.
IMPORTANT NOTE: Solvent Weld Waste Pipe fitting sizes are often stated in metric standard measurements, however the actual pipe size is measured in imperial. The three options are as follows - 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. In addition if the term "ABS" is printed on the pipe this identifies the pipe as solvent weld waste pipe.