Please click Accept Cookies to continue to use the site.

E2787 - TALBOT MDPE 25mm x 3/4" Elbow Bend with Female Thread

£6.95 £5.27
(You save £1.68)
SKU:
70040266.1
UPC:
5698292061059
Availability:
Usually Shipped within 24 Hours
Pipe Size:
25mm
Thread Size:
3/4 Inch
  • E2787 - TALBOT MDPE 25mm x 3/4" Elbow Bend with Female Thread

TALBOT Female Iron Elbow (PE x FI) is available in 6 variations all available in this section. For other sizes you can enter the product code shown below into the search above or search using category

  • 20mm x 1/2" Talbot Female Iron Elbow - Talbot Product Code E2782
  • 25mm x 1/2" Talbot Female Iron Elbow - Talbot Product Code E2789
  • 25mm x 3/4" Talbot Female Iron Elbow - Talbot Product Code E2787
  • 32mm x 1" Talbot Female Iron Elbow - Talbot Product Code E2788
  • 50mm x 1 1/2" Talbot Female Iron Elbow - Talbot Product Code E4353
  • 63mm x 2" Talbot Female Iron Elbow - Talbot Product Code E4354

The Talbot Pushfit joint is a tried and tested method of jointing low, medium and high density polyethylene water pipe, from 16mm to 180mm and their imperial equivalents. The fitting is quick and easy with no nuts to leave undone - simply push the pipe into the joint. The joint's grip and seal on the pipe increases with water pressure and tensile load which means that the pipe will burst or neck before the joint fails.

Using a common body and only two sets of interchangable components, Talbot Pushfit will connect to metric PE pipes and their imperial equivalents

IMPORTANT NOTE, MOST PLUMBING PRODUCTS ARE STATED AS BSP IMPERIAL THREAD MEASUREMENT WHICH MEANS THAT ACTUAL DIAMETER OF THE THREAD SIZE IS APPROXIMATELY 1/4 INCH LARGER THAN THAT STATED IN BSP TERMS. FOR EXAMPLE THIS 3/4 INCH BSP THREAD ACTUALLY MEASURES APPROXIMATELY 1 INCH IN DIAMETER